How to Remove Plastic Dip from Rims: Several avid car fans are becoming more creative towards making some amazing designs or changes in their vehicle. One of the major things done by car geeks is using Plasti Dip in coloring and designing rims of their tires.
However, there have been instances where you just want to take out that rubber coating on tires in the rim because you want to regain its natural look, design, or change color. If so, I present before you and going to show you a complete and painless guide on how to do it.
What is Plastic Dip?
Plastic Dip is a new thought of using rubber coating which is primarily used in insulating handles of various tools to have a better grip and avoid slippage. It is sprayed or brushed onto any surface and can even be dipped – like the handles, rims, fenders, bumpers, etc. It can even help to insulate the handles of various tools to offer a better grip and prevent slippage while traveling. Some users also apply it to give a new look to their automobiles and vehicles.
The paint is flexible which means it does not peel, chip, or become brittle and crack. One of the many benefits includes that it can resist acids, alkali, weather, UV light, impact, abrasions, etc, and insulates from electrical shock, dead sound, and vibration heat.
Undoubtedly the process of applying this is as easy as spraying in the color of choice we want. Plasti dip is regarded differently from other kinds of paints and sealants because it can get peeled off by hand.
To get the best results, we must apply at most 5 coats of it at an interval of 15 minutes and also let the object sit for 5 hours after the last coat. This helps the paint develop a strong and intimate bond with the surface. When the paint is applied in this manner then it lasts for up to 3 years.
Things that must be avoided doing before removing plastic dip from rims:
Before proceeding to how to remove plastic dip without making the car look patchy or ugly, we need to know what we need to stay away from. Below are some strategies that can not be ignored while doing this:
- Use metal-edged blades on the car- While removing plastic dip, do not use a sharp scraper or metal blade on the vehicle even if you are confident you won’t ever make a mistake.
- Apply powerful cleaners- Pay special attention when using any harsh chemical or acid, especially as we’ve got a bottle of chemical available at home. It might be the acid that can make it rust.
How to remove plastic dip from rims
1 Use Rust penetrant lubricants– It lubricates and displaces moisture. It smoothes leather and cleans surfaces like a tile, your car, etc. After securing this aerosol we must remove the wheels from the tires to prevent damage to the brake pad present. Next, spray this on the tire and leave it for 7 minutes straight. It should penetrate Dip and start dissolving the adhesive.
2 Use your hands and nails- Peeling off the rubber skin with hands and nails. The coat behaves like how the nails gel polish on the fingers.
3 Use Kerosene– This is a cost-effective and practical option. The chemicals in Plasti Dip are organic. Thus, we know that an organic substance will dissolve in an organic solvent only. Kerosene is an organic solvent that dissolves rubber.
4 Use Adhesive Removers- The chemical composition of the chemical adhesive removers has organic solvents. Removal of the tire from the car to protect the brake system should be done.
5 Use paint thinner– Take sufficient amounts of paint thinner in a bottle. Soak the paper towels in this volatile liquid. And place them on the rim. The bottle would prevent the thinner from evaporating away too quickly.
6 Isopropyl Alcohol- Any alcohol is a good organic solvent thus it will work on the rubber paint too. Isopropyl alcohol is a volatile liquid. You can either make a setup like the paint thinner. Or let out sufficient amounts to soak the paper towel.
Plastic dip can at times be tough to remove from vehicles especially if it has been there for a very long time. If plastic dip was not applied properly at first then this can also make it difficult to remove from a vehicle because it will not be easily removed by tearing it off only.
If enough layers of plastic dip are applied when you first apply the plastic dip to your vehicle it should be easy to remove by just ripping it off in sheets.
If assistance is required in removing plastic dip from vehicles, chemicals can be used to help you remove it but you would want to make sure that you re-apply some wax or sealant if any kind of chemicals to remove plastic dip from vehicles are used.
My name is Nick, and I am a car mechanic from Wichita, Kansas. And I drive a 1967 Chevrolet Impala.