How to Remove Scratches from Windshield

How to Remove Scratches from Windshield: Removing scratches from our car doesn’t have to be hard. It’s actually pretty easy! Little and light scratches must be solved quickly once spotted since the repair if done can restore the window’s integrity. Below are steps on how to remove scratches from the windshield step by step efficiently:-

How to Remove Scratches from Windshield

How to Remove Scratches from Windshield

  • Determine the depth of wear windshield scratches

Deep scratches if not treated continue to grow until the windshield breaks down. Ask a glass repair specialist for advice. They may tell us to replace the entire windshield. Whenever feeling these scratches while we run the fingernail over them, then an expert is the one we need at that moment. That’s because a professional owns more modern tools and advanced compounds to repair scratches and cracks. Minor scratches will feel smooth and wear nails will not become caught in a groove. If we notice that our fingernails are catching, that is a sign we might have a deep scratch in our windshield.

Deep scratches should be addressed as soon as possible as they can be worse over time and eventually might cause the windshield to shatter on its own.

 

  • Prepare wear auto glass repair kit

Every tool needed to repair the scratch marks comes in a repair kit. Repair kits include a polishing compound for shine along with a buffing pad. Cerium oxide, the chemical is the most suited polish in these kits but other products are also found and work the same way.

This can cure any defect on the glass quite effectively. This is a lovely solution to fix all deep scratches. The chemical substance is most commonly used in jewelry industries because of its low-abrasive characteristic features. It works well on polishing glass, metal, and ceramic stuff. An acrylic scratch remover is a product similar to cerium oxide. It comes in the market in a liquid form. It works best on lighter scratches.

Another option we might try is to assemble the components of the kit separately. Get cerium oxide or another rubbing compound. 

 

  • Clean up the scratched spots

Wash the windshield, to begin with, with a soap and water solution thoroughly to remove any dust or dirt present. Use a microfiber cloth to dry the windshield before applying the Cerium Oxide chemical rubbing compound on it directly.

If the attempt is to repair a chip, bull’s eye, or star in our shield, the repair kit provides an applicator device common everywhere designed to apply pressure to remove air from the repair part to apply the compound without the risk of air bubbles in it.

Do not forget about using the tape to cover all parts of the edges of the windshield present. Doing this will help in preventing the substance from splashing on other parts of the vehicle.

 

  • Mark the scratched spots

We always need to mark the areas we need to work on. We can just outline the scratches with a marker on the other side of the glass and put tape on the opposite side to mark the areas.

 

  • Use the glass repair kit

Now when it’s time to apply the rubbing compound on the car’s windshield then we apply it with a soft cloth. We don’t have to worry because most of the rubbing compounds are similar to toothpaste, so it’s not hard to apply and spread it on the surface evenly. 

Next, sprinkle a little water on the compound. Use a clean cloth to rub the compound gently over the windshield.

To make the compound, use a spatula to mix the cerium oxide powder with water in a bowl and then blend these two ingredients until they create a slurry solution. Now Store a little amount of water in case the mixture starts to dry out during the process of making.

 

  • Buff out the scratches on the windshield

Attach the buffing pad to the drill and once the pad is secure, apply the paste directly to the scratched areas present. Then, we can just turn on the drill and run it on the edge of the pad back and forth along with the scratches a few times. Keep the pad pressed firmly. We have to make sure that the buffer is specially made for the glass surface only. Utilize just the buffer at the lowest level to polish the affected spots within ten seconds of the start. Since the rubbing compound could dry up so fast, we must polish it as fast as possible.

 

  • Leave the rubbing compound dry

It usually takes around 30 minutes for the compound to dry out completely. Once dried, we can wash the entire windshield. In the end, we will have a clearer and smoother glass without any scratch present on it.

Final word

A scratched windshield can make it extremely difficult to see during driving. Sunlight reflects off the scratches, therefore, decreasing the visibility and water can collect in the grooves making it impossible for the windshield wipers to remove the water completely from it.

While most minor scratches can be removed with the proper tools present, deeper scratches should be repaired by a glass repair specialist only.

But before trying these steps make sure the window is scratched, not cracked.

Leave a Comment