How to Remove Studs from Tires: Tire studs are short, fat nails with a flat head on the bottom and a tungsten pin on the top. They are put up flat-head-down into holes molded in a unique design when the tire was being manufactured. The extended parts of the stud gun are inserted into the molded holes and expand the tread rubber, insert the stud, and are then withdrawn from it and so this allows the tread rubber to nearly returning to its original position and press against the stud back, holding it in its place.
Ok, so the thing is winter’s gone, and the summer days are coming. So how to remove studs from tires? Is it easy to do this job at home, or should we bring our car to the garage? Winter studs are very useful for use during the winter season. It ensures more movement for tires in the winter season. But studdable tires come in the market having no studs. It must be bought separately and set up in another way.
Why do We Need Studded Tires?
Studded tires are a great option. Opposing the popular belief, studded tires are allowed everywhere in Canada during winter, except in southern Ontario. According to the location and our commuting habits, we could benefit from that type of tire.
In rural areas, use secondary roads and sometimes visit resorts on the weekend, studded tires may save you some trouble. This will make us feel safer because it provides effective braking and enhanced grip on ice.
Conversely, if we mostly drive in a city where paved roads are rarely found with ice or snow, traditional winter tires are a better option for us.
If you choose to install studded tires on your car, then you have the legal obligation to change all four of them at once. Moreover, you should be knowing that studded tires are forbidden in several parking garages and lots.
How to Stud Tires?
- Snap a stud into the tip of the tool.
- We must position the end of the stud’s auger firmly against a thick knob of the tire and then apply pressure straight down while slowly screwing the stud. Studs may emerge out if they are not properly sunk into the rubber.
- Remove the tool from the stud.
- One thing to note is stud sizes are varied in nature. The manufactures will have a particular format to follow for each of their studs. So we should check with the tire manufacturers about the tires and the size of studs to understand it nicely.
How to Remove Studs from Tires
1. Pick up the Right Tool
Car shops use a stud removal tool to take studs out with the least force and without damaging the tire. You can use either a small flathead screwdriver or needle-nose pliers. If either of these is absent then just use a small knife, but you must be extra careful not to puncture the tires. It is always safer for first-timers to use a tool like pliers that lift the studs instead of digging them out of it.
2. Take Off the WheelSome people want to work on their tires while they’re still in the car, but it makes the process unnecessarily complicated then. It can also be more dangerous, and you would need to move the vehicle to reach the entire tire.
Taking off the wheel will give more room or area to work and allow better control of the studs. Use a jack to keep your car supported. Using a lug wrench we can remove the wheel and support it on the ground safely.
3. Apply Lubricant
Putting some lubricant in the stud will help you to loosen the rubber and get the tire studs out with very little effort. Nothing is to be bought at a store; a spray of soapy water on tires will do, or apply some dish soap directly onto the tire.
4. Pop Them Out
Apply the lubricant directly to the tire. A stud removal tool has a round tip that has been designed to go around the stud to lift it off. To use it, you only need to place it on the tire and drive the tool gently under the stud. Then, twist it slightly.
5. Check the Tread
Go around the tire before you put the wheel back on the car. Ensure there are no punctures or other damage to it, and that the air pressure is normal.
6. Put the Wheel Back on
It’s time now that we put the wheel back, move on to the next one and repeat the process. When you’ve finished, remember to secure the lug nuts properly.
So get set, go to work and get those snow tires ready for the summer roads present. Grab a stud removal tool, some pliers, or a screwdriver, and don’t forget to use some soap as a lubricant to loosen up your tire studs.
Learning how to remove studs from tires is easy and doesn’t take much time. Remember that you should only stud new tires and that it’s not safe to stud your tires again after removing the studs.